English

Product Center

Chinese wholesale Fr A2 Core Production Line - COMPARISON TABLE (FR A2 ACP COMPARED WITH OTHER PANELS) – BOTEC Featured Image
  • Chinese wholesale Fr A2 Core Production Line - COMPARISON TABLE (FR A2 ACP COMPARED WITH OTHER PANELS) – BOTEC

Chinese wholesale Fr A2 Core Production Line - COMPARISON TABLE (FR A2 ACP COMPARED WITH OTHER PANELS) – BOTEC

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our well-equipped facilities and great good quality regulate throughout all stages of manufacturing enables us to guarantee total buyer gratification for Aluminium Composite Panel Work, Interior Wall Acp Sheet, A2 Core, Our company warmly welcome friends from all over the world to visit, investigate and negotiate business.
Chinese wholesale Fr A2 Core Production Line - COMPARISON TABLE (FR A2 ACP COMPARED WITH OTHER PANELS) – BOTEC Detail:

Product Description

Performance

 Class A Fireproof
Composite Metal Panels		 Single Aluminum Plate Stone Material Aluminum Plastic
Composite Panel

FLAME RETARDANT

 Class A fireproof metal composite plate is used with fireproof mineral core, at extreme high temperatures that it will not ignore, help to combust or release any toxic gases, It really achieves that there is no falling objects or spread when the products is exposed in fire. Single Aluminum Plate mainly made of aluminum alloy material, high temperature around 650 degrees to melt. Fireproof rate is Class A for Stone materials. Aluminum plastic composite panel body material is plastic, the highest fire rating B1 level, at high temperatures will block burn, and it will produce toxic gases and drip after burning plastic, It is easy to ignite other objects. Many countries tall building have banned to use.

THERMAL CONDUCTIVITY

 Class A fireproof composite panels uses
an inorganic core. Detected by the state
authority, internal exposure index
reached 0.01 (National Standards ≤1.3),
It has good insulation properties.		 Aluminum has good thermal conductivity, single aluminum plate don’t have good insulation function. Natural stone, high thermal conductivity, fast heat conduction, poor insulation effect. Higher thermal conductivity of plastics, aluminum composite panel and therefore have poor insulation.

CONVENIECE

 Our Class A fireproof metal composite panels nave the unique advantage of easy installation, and can be adjusted according to site-specific construction cases, this can be done precise size, system construction convenient, ordinary workers can install 40 square meter per day, greatly shorten the construction period ensure project closeout rapid and cost savings. Single Aluminum Plate manufacturing process is complicated and the leadtime is quite long, need to be transported to the construction site for  installation, can not achieve onsite cutting, require high accuracy and precision of construction drawings. It’s not only difficult to transport but also costs a lot. Stone is mainly used with Tee installation and the back yard orbolt connection, the need drilling or grooving, drilling or slotting stress can lead to damage of the while construction is low, ordinary workers can install 5 square meter per day, this has led to an increasing in labor costs and working period.

PHYSICAL PROPERTIES

 Our company’s Class A fireproof metal composite panels plate  thickness of 3mm, 4mm, 5mm, etc., an Inorganic core and having a good ductility and physical make a variety or shapes, the minimum radius of curvature reach 30cm. A fire metal composite panels with high strength, can withstand a certain degree of shock, vibration and pressure. Afire metal composite panels with light weight, the weight of the sheet of 4mm 7.8p per SQM, Having a muti-layer composite, not deformed. Pure aluminum generally uses AA 1100 aluminum plate or aluminum alloy plate AA3003, generally domestic use 443003 aluminum plate. Stone is thicker, heavier,  therefore the weight  per square meter weight, which increases the keel relative requirements, to mention a long cost. Stone compression, shock, impact antibodies poor, easily broken. Stone was unable to make a variety of shaped  and shapes. It is difficult to express the characteristics of the designer’s idea. Aluminum plate, lighter weight, but with low strength, and poor impact resistance.

APPEARANCE

 Class A fireproof metal composite panels using roll coating process, the board is always in the temperature curve point, no color changes during the roll coating process.
Roller is a pressurized printing style painting, film and painting the entire surface of the non granular, non-porous.
The boar is extremely smooth, very smooth surface, contaminant can not be penetrated, green and beautiful, not fade for a long time on deformation		 Single Aluminum plate is used by the method or spraying process, during spraying the board is always in temperature curve, prone to chromatic aberration. Spray painting is an electrostatic floating suction, the entire coating film and the surface is deposited by the particles and micropores, the board can do relatively flat, smooth surface, but also likely to be contaminated. Hard surface cleaning, and fugitive deformation. Color is restricted by natural causes, color is single with a clear color difference between the two stones, the board easy to fad with the passage of time. Aluminum plastic composite panel core main material for plastic, long prone to thermal expansion and contraction drum kits, cracks, affecting the appearance.

ENERGY SAVE

 Use environment friendly inorganic core for this panel. It contains no asbestos. Formaldehyde, benzene and other harmful radioactive elements. Aluminum is non-renewable resources, limited quantity, production process is high energy consumption, high pollution, products are ruled out. Stone has complex composition, containing various metal elements inside and the radiation can be lethal, mostly the element of hydrogen.

OVERALL COST

 We have the price advantage of the men material.
Keel and other supportive materials require less, and can save costs.
Quick and easy construction.
Reduce labor costs and shorter duration, project closeout rapidly.		 The main material prices are higher.
It can be recovered, with some cost return.		 The main material is relatively higher and supportive materials like keels require more costs.
Complicated construction and higher labor cost long construction period, easy to fall off, not safe.		 The production cost is very low for this panel.
Product detail pictures:

Chinese wholesale Fr A2 Core Production Line - COMPARISON TABLE (FR A2 ACP COMPARED WITH OTHER PANELS) – BOTEC detail pictures

Related Product Guide:
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Chinese wholesale Fr A2 Core Production Line - COMPARISON TABLE (FR A2 ACP COMPARED WITH OTHER PANELS) – BOTEC , The product will supply to all over the world, such as: Armenia, Australia, Ottawa, Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
    • The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
    5 Stars By Heloise from Ireland - 2017.01.11 17:15
    The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
    5 Stars By Diana from Nigeria - 2018.12.11 14:13
    Write your message here and send it to us

    Related PRODUCTS

    Hit enter to search or ESC to close